***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Aug 15, 2025 12:40 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
Jwardle81
PostPosted: Wed Oct 29, 2014 7:43 pm 
Offline
Mahogany
Mahogany

Joined: Sun May 11, 2014 7:57 pm
Posts: 52
First name: Jimmy
Last Name: Wardle
So last night as we were finishing up my top, we started tap tuning and noticed a rattle type sound. All braces were tightly glued. Through investigation we found that the spalted maple rosette must have had a micro crack, or was loose. Has anyone experienced this before? We soaked the rosette in CA glue to try and bind and any cracks, and strengthen the fibers. It seems to have worked, but for how long is the question?!? We are at a point where we either push on, or build a new top, then I would route out the rosette and replace it down the road. Any thoughts would be appreciated

Image


Jimmy


Sent from my iPhone using Tapatalk
Top
 Profile  
 
meddlingfool
PostPosted: Wed Oct 29, 2014 8:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7555
First name: Ed
Last Name: Bond
City: Nanaimo
Country: Canada
Focus: Build
Status: Professional
If you cA'd it real good, it should last as long as the guitar.
Top
 Profile  
 
johnparchem
PostPosted: Wed Oct 29, 2014 9:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1715
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
I agree more thin CA. It should seep everywhere it needs to. The rosette looks good.

_________________
http://www.Harvestmoonguitars.com
Top
 Profile  
 
JasonMoe
PostPosted: Wed Oct 29, 2014 9:24 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Jan 20, 2009 12:41 am
Posts: 606
Location: LaCrosse WI
First name: Jason
Last Name: Moe
City: LaCrosse
State: WI
Zip/Postal Code: 54601
Country: USA
Focus: Build
Status: Semi-pro
Can you pinch the rosette and stop the buzz? If theres a loose pocket you might be able to drill a small hole under the rosette without going through it and put some CA under it to hold it. And yes the rosette looks awesome.

_________________
Jason Moe
LaCrosse WI 54601
Top
 Profile  
 
Tom West
PostPosted: Thu Oct 30, 2014 7:16 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 27, 2008 4:10 pm
Posts: 2764
First name: Tom
Last Name: West
State: Nova Scotia
Country: Canada
Focus: Build
Status: Amateur
Jimmy:
Have never had this happen with a rosette but have had it happen with reversed kerfed linings a couple of times. The first time near drove me crazy(as if I'm not anyway)trying to find it. CA came to the rescue. I think Jason had a good idea and if it was mine I would drill 12 (30 degrees or so apart) 1/16" holes in the back of the top under the rosette and soak them with CA. The rosette is eye catchy for sure.
Tom

_________________
A person who has never made a mistake has never made anything!!!
Top
 Profile  
 
John Killin
PostPosted: Thu Oct 30, 2014 2:19 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Mar 18, 2008 8:43 am
Posts: 776
Location: Florida
First name: John
Last Name: Killin
Focus: Build
Status: Amateur
I've done the CA flood trick on rosettes and it works. If you soaked it good enough and it is a tight fit you should be fine. I've even done Jason's trick, but I packed epoxy in.

The reason I didn't use CA is because I didn't want to risk the CA wicking into the top and turning it green. Be careful of that.
Top
 Profile  
 
mqbernardo
PostPosted: Sun Nov 02, 2014 8:03 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro
i just had the same problem and what i did was drill some 1/16 inch holes through the spruce on the underside of the rosette, heat the thing and flood it with thinned (around 1:4) HHG, then clamp for a couple of hours. i was a bit anxious about glue coming out on the face side side, but it just worked perfectly.

_________________
member of the guild of professional dilettantes
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com